Scanners

GODEX 2200 DRIVER DOWNLOAD

By admin on March 8, 2020 0 Comments

The USB device is built on the serial port, therefore make sure the interface setting is specified to the assigned port. Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. Pressure Adjustment Pressure Adjustment 1. Screw the Cutter Cover onto the cutter kit. Face the printer front, and unscrew the Bottom Cover Screw. Avoid pushing the guide too far in to damage the label edge.

Uploader: Vudogami
Date Added: 13 June 2008
File Size: 55.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 11683
Price: Free* [*Free Regsitration Required]

To print the manual completely, please, download it. Govex the Bottom Front Cover. Align the label roll with the Label Width Guide. Power on the PC.

Close the top cover to complete the ribbon installation. In the Self-Test Mode, the printer will print out a test sample each time when the Feed key is pressed.

Don’t show me this message again. Table Of Contents 1.

Godex EZ-2200 Plus Label Printer

The printing precision and imprint uniformity due to a patented print head clamping mechanism retains for a long time. Etiquette tape, continuous paper, fabric and polymeric carriers, cardboard, etc. Print head density of 8 dots or 12dots per mm or dots per inch. Please check the specific print mode, then go into the Setting Mode after power on the printer.

  ES1371 WINDOWS 98 DRIVER

Remove the Rewinder Option Cover Plate. The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally.

Godex EZ Plus label printing machine | TEA Industrial Adhesives

Enter text from picture: Open the Top Cover of the printer, and turn the printer sideways. Got it, continue to print. Page of 34 Goeex. Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job.

GODEX / Plus Barcode Printer

When printing, no ribbon is necessary; it only requires direct thermal media. Open the top cover.

Face the printer front, and unscrew the Bottom Cover Screw. Power off the printer, press and hold the Pause key. One side of the printout not being printed clearly or ribbon wrinkle occurs, adjust the TPH Spring Box position or pressure to cure the problem. TPH print line adjustment 1 When printing stiff or thick paper, the print line needs to be moved forward paper feed direction in order to achieve better printing quality. Barcode Printer Chapter 1. This manual also for: Flip the Print Head Lever back to its original position.

  ASUS P5P800SE SOUND DRIVER DOWNLOAD

Godex EZ-2200 User Manual

yodex The strength and distribution of clamping pressure is adjusted by two stops. Remove the two screws in the front. Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH After the TPH print line adjustment is completed, use the flat godeex screwdriver to tighten up the TPH screws A clockwise as indicated by the arrows.

Control Panel Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one godez time, the printer will continue with the rest of the print job. Comments to this Manuals Your Name. The USB device is built on the serial port, therefore make sure the interface setting is specified to the assigned port.

Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer.